We’ve all had mold in our refrigerator at some point or another, but most of us just accept that this is going to happen and there’s not much that we can do about it. Food ages in our refrigerator whether it’s a piece of fruit, a vegetable, or a jar of grape jelly and becomes moldy over time. This mold spreads to the other items in our fridge and contaminates them, as well. What can you do about it?
Well, storing your food in your refrigerator properly is one of the most important things that you can do. Mold, bacteria, and mildew will start to grow in your fridge if you don’t. Check your food items in the fridge regularly and if anything is showing signs of mold growth, remove it immediately.
Don’t leave cracked egg shells in the carton. Bacteria exists on the outside of the egg shells and once on the inside, even if you’ve removed most of the egg, some of it still remains on the inside of the shell and bac
There are some general rules if you find food that has mold growing on it. There are some kinds of cheeses that are made with mold, but sometimes we see a spot of it that shouldn’t be there, like on a block of cheddar cheese. You don’t have to throw the whole block away, just take a clean knife and cut off the moldy part. It’s best to cut about an inch around and an inch underneath the spot to make sure that it doesn’t contaminate the rest of the block and don’t touch your knife to the mold. Don’t bother trying to save any soft cheeses or individual slices or sour cream.
You should follow the same rule for things like country ham and hard salami. If it’s covered with mold, though, toss it.
Any fruits and vegetables that are showing mold can be treated this way as long as they’re hard natured. Soft ones like plums or tomatoes should be thrown away if you see mold.
Any grains that you see with mold on them should be thrown away immediately. Be careful about any organic food that you buy; these don’t contain any pesticides or preservatives, they’re more likely to have mold growth.
Any tissue in potatoes that looks black or discolored in any way should be cut off.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Saturday, September 29, 2007
Mold and Your Health
If you have lived in the same home for a while now, you have probably gotten used to living there and any gradual changes that have been made. You probably barely think of how the paint on your walls is fading, or how the carpet has a little stain here and there, or how your ceiling got that patch of mold. Mold spreads in places in the house that we rarely go, like basements, the back of our closets, and in areas containing plumbing. It is dangerous for mold to spread across one’s home. Depending on how long the mold has been present, serious health complications could arise that you aren’t even aware of.
Mold inhalation can cause such afflictions as asthma, allergies, bleeding in the lungs, respiratory illness, or, perhaps most frightening, cancer. It has been shown that children are more likely to develop asthma if they are exposed to molds in working and home environments. Apart from asthma, hives, sinus problems, tremors, vomiting, dizziness, and even mood swings have been known to occur in places where mold has been allowed to spread freely across.
Pneumonitis is a condition that afflicts the lungs, and is developed by inhaling dust, mold, or fungus spores for long periods of time. If a person is not removed from the area where these spores are located, they could have permanently lung damage, among the other serious conditions that could go along with it. Although it may be expensive to have a professional help remove the mold spores and dust from the house, it would be nowhere near as expensive as the impending medical bills that would come around as a result of lung damage.
There is an abundance of health complications that could come about from prolonged exposure to mold and dust, many of which people are unaware of. Often, people are unaware that there even is a dust problem in their house, and this is especially dangerous. The owner of the home usually thinks that they cannot afford to vacate their home while a professional helps remove the mold, so they stay there. But, in all actuality, they are only putting their spouse, children, any elderly relatives that may live with them, and pets in serious physical jeopardy. It is best to simply vacate and find some means of getting the house cleaned before it becomes completely infested and unlivable.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
Mold inhalation can cause such afflictions as asthma, allergies, bleeding in the lungs, respiratory illness, or, perhaps most frightening, cancer. It has been shown that children are more likely to develop asthma if they are exposed to molds in working and home environments. Apart from asthma, hives, sinus problems, tremors, vomiting, dizziness, and even mood swings have been known to occur in places where mold has been allowed to spread freely across.
Pneumonitis is a condition that afflicts the lungs, and is developed by inhaling dust, mold, or fungus spores for long periods of time. If a person is not removed from the area where these spores are located, they could have permanently lung damage, among the other serious conditions that could go along with it. Although it may be expensive to have a professional help remove the mold spores and dust from the house, it would be nowhere near as expensive as the impending medical bills that would come around as a result of lung damage.
There is an abundance of health complications that could come about from prolonged exposure to mold and dust, many of which people are unaware of. Often, people are unaware that there even is a dust problem in their house, and this is especially dangerous. The owner of the home usually thinks that they cannot afford to vacate their home while a professional helps remove the mold, so they stay there. But, in all actuality, they are only putting their spouse, children, any elderly relatives that may live with them, and pets in serious physical jeopardy. It is best to simply vacate and find some means of getting the house cleaned before it becomes completely infested and unlivable.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
Mold and Your Food
We’ve all had mold in our refrigerator at some point or another, but most of us just accept that this is going to happen and there’s not much that we can do about it. Food ages in our refrigerator whether it’s a piece of fruit, a vegetable, or a jar of grape jelly and becomes moldy over time. This mold spreads to the other items in our fridge and contaminates them, as well. What can you do about it?
Well, storing your food in your refrigerator properly is one of the most important things that you can do. Mold, bacteria, and mildew will start to grow in your fridge if you don’t. Check your food items in the fridge regularly and if anything is showing signs of mold growth, remove it immediately.
Don’t leave cracked egg shells in the carton. Bacteria exists on the outside of the egg shells and once on the inside, even if you’ve removed most of the egg, some of it still remains on the inside of the shell and bacteria will feed on it.
There are some general rules if you find food that has mold growing on it. There are some kinds of cheeses that are made with mold, but sometimes we see a spot of it that shouldn’t be there, like on a block of cheddar cheese. You don’t have to throw the whole block away, just take a clean knife and cut off the moldy part. It’s best to cut about an inch around and an inch underneath the spot to make sure that it doesn’t contaminate the rest of the block and don’t touch your knife to the mold. Don’t bother trying to save any soft cheeses or individual slices or sour cream.
You should follow the same rule for things like country ham and hard salami. If it’s covered with mold, though, toss it.
Any fruits and vegetables that are showing mold can be treated this way as long as they’re hard natured. Soft ones like plums or tomatoes should be thrown away if you see mold.
Any grains that you see with mold on them should be thrown away immediately. Be careful about any organic food that you buy; these don’t contain any pesticides or preservatives, they’re more likely to have mold growth.
Any tissue in potatoes that looks black or discolored in any way should be cut off.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Well, storing your food in your refrigerator properly is one of the most important things that you can do. Mold, bacteria, and mildew will start to grow in your fridge if you don’t. Check your food items in the fridge regularly and if anything is showing signs of mold growth, remove it immediately.
Don’t leave cracked egg shells in the carton. Bacteria exists on the outside of the egg shells and once on the inside, even if you’ve removed most of the egg, some of it still remains on the inside of the shell and bacteria will feed on it.
There are some general rules if you find food that has mold growing on it. There are some kinds of cheeses that are made with mold, but sometimes we see a spot of it that shouldn’t be there, like on a block of cheddar cheese. You don’t have to throw the whole block away, just take a clean knife and cut off the moldy part. It’s best to cut about an inch around and an inch underneath the spot to make sure that it doesn’t contaminate the rest of the block and don’t touch your knife to the mold. Don’t bother trying to save any soft cheeses or individual slices or sour cream.
You should follow the same rule for things like country ham and hard salami. If it’s covered with mold, though, toss it.
Any fruits and vegetables that are showing mold can be treated this way as long as they’re hard natured. Soft ones like plums or tomatoes should be thrown away if you see mold.
Any grains that you see with mold on them should be thrown away immediately. Be careful about any organic food that you buy; these don’t contain any pesticides or preservatives, they’re more likely to have mold growth.
Any tissue in potatoes that looks black or discolored in any way should be cut off.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Mold and Ways to Avoid It
A little known fact about mold is that it is everywhere, even the air we breathe. Mold is a form of fungus that grows everywhere in the world, of which uncountable quantities of species and colors exist. Despite the fact that most molds are harmless and come in pretty colors, there are some to be sure to steer clear from. A prime example of dangerous mold is toxic black mold, which anyone would be afraid of dwelling in their houses. Black mold is a highly toxic mold which many people are allergic to, not to mention the health complications the mold brings on its own.
Mold is a very sneaky fungus which can invade your home from outside, or leaky plumbing, or even condensation due to high humidity. Mold loves to grow where there is a lot of moisture in the air or even where there is water in general.
While at first glance mold may not seem like something to write home about, it is an ugly force to be reckoned with. Molds can cause very nasty health problems, and can ruin furniture, clothing, and food. If any of these are plagued with mold, it will take rigorous scrubbing and sterilization before they can be used again, if it’s a good idea to use them again at all. Some items are best just thrown away, like the aforementioned food and clothing. If one discovers a mold infestation, one should remove the mold through any means necessary, including cleaning kits, or different testing. If neither of these works, it is highly recommended to call in a professional to evict the mold from your home, because no one wants something living in their home that doesn’t pay rent.
Some should worry about mold more than others. Small children, elderly people, and basically anyone who is afflicted with a respiratory condition should be cautious. Anyone whose immune system is weakened, pregnant women, anyone freshly out of surgery, or chemotherapy patients are also at high risk.
It is actually easy for one to prevent mold from tormenting your living environment, as long as you make sure to be consistent with home cleaning habits. It is important to make sure that your home is fairly dry and cool, with as little moisture as possible. The most popular hang-out spots for mold are the basement and the attic, which like to attract humidity. Any spill that occurs in a bathroom or kitchen should be cleaned up quickly, but thoroughly. Do not allow standing water in any place in the home, or it will become a hotbed for bacterial infection which leads to mold. It is also important to draw heat and moisture away from your home with fans, and a good ventilation system.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Mold is a very sneaky fungus which can invade your home from outside, or leaky plumbing, or even condensation due to high humidity. Mold loves to grow where there is a lot of moisture in the air or even where there is water in general.
While at first glance mold may not seem like something to write home about, it is an ugly force to be reckoned with. Molds can cause very nasty health problems, and can ruin furniture, clothing, and food. If any of these are plagued with mold, it will take rigorous scrubbing and sterilization before they can be used again, if it’s a good idea to use them again at all. Some items are best just thrown away, like the aforementioned food and clothing. If one discovers a mold infestation, one should remove the mold through any means necessary, including cleaning kits, or different testing. If neither of these works, it is highly recommended to call in a professional to evict the mold from your home, because no one wants something living in their home that doesn’t pay rent.
Some should worry about mold more than others. Small children, elderly people, and basically anyone who is afflicted with a respiratory condition should be cautious. Anyone whose immune system is weakened, pregnant women, anyone freshly out of surgery, or chemotherapy patients are also at high risk.
It is actually easy for one to prevent mold from tormenting your living environment, as long as you make sure to be consistent with home cleaning habits. It is important to make sure that your home is fairly dry and cool, with as little moisture as possible. The most popular hang-out spots for mold are the basement and the attic, which like to attract humidity. Any spill that occurs in a bathroom or kitchen should be cleaned up quickly, but thoroughly. Do not allow standing water in any place in the home, or it will become a hotbed for bacterial infection which leads to mold. It is also important to draw heat and moisture away from your home with fans, and a good ventilation system.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Saturday, September 8, 2007
Equipment to Remedy Mold
It does not take long to realize that one who chooses to remedy a mold infestation on their own, as opposed to hiring a professional to do the deed, will probably be wondering as to what the safest way to do this is. It is important that safety is first and foremost on the long list of things to take into account when dealing with the scourge on one’s home that is mold. Aggravation of asthma, emphysema, respiratory infections, rashes, eye infections, and even death are just some of the health complications that can come about from having mold in the home.
One of the best ways to ensure that the remediation process is as safe as possible is to know the kind of tools the job will call for. And to know what the job will call for, you must know just how much mold needs to be removed. If there is mold growing on the walls of your home, then trying to wash the mold off with mold killing chemicals probably, and unfortunately, will not work. In fact, possibly the only solution is the most expensive solution and that would be completely removing and replacing the drywall. However, if the mold has not seeped all the way into the drywall, then this may not be required.
It comes highly recommended that one uses heavy duty mold killing chemicals in the remediation process. If you read product reviews, it should be easy to become committed to buying a particular cleaner. It is also recommended that you buy a high strength brand of trash bag to keep on hand, should any contaminated materials be discovered that should be disposed of immediately. It is very important that you do not touch anything contaminated that you throw away, as it is possible to cause cross contamination.
You should also purchase some sort of respirator during the remediation process, no matter how serious the contamination is. A half or full face mask respirator will most likely be required if you are going to be removing the drywall or any other possible building materials from your home or building. A full face mask can be purchased for roughly $130. You should also buy disposable protective clothing which is fairly inexpensive, especially when you consider the amount of protection that will be received from them. Breathable gloves should be, but these can often only be bought in bulk quantities.
You should also purchase a vacuum with a HEPA filter. These vacuums collect mold spores that have settled onto the floor and have possibly worked their way into the fibers of your carpet.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
One of the best ways to ensure that the remediation process is as safe as possible is to know the kind of tools the job will call for. And to know what the job will call for, you must know just how much mold needs to be removed. If there is mold growing on the walls of your home, then trying to wash the mold off with mold killing chemicals probably, and unfortunately, will not work. In fact, possibly the only solution is the most expensive solution and that would be completely removing and replacing the drywall. However, if the mold has not seeped all the way into the drywall, then this may not be required.
It comes highly recommended that one uses heavy duty mold killing chemicals in the remediation process. If you read product reviews, it should be easy to become committed to buying a particular cleaner. It is also recommended that you buy a high strength brand of trash bag to keep on hand, should any contaminated materials be discovered that should be disposed of immediately. It is very important that you do not touch anything contaminated that you throw away, as it is possible to cause cross contamination.
You should also purchase some sort of respirator during the remediation process, no matter how serious the contamination is. A half or full face mask respirator will most likely be required if you are going to be removing the drywall or any other possible building materials from your home or building. A full face mask can be purchased for roughly $130. You should also buy disposable protective clothing which is fairly inexpensive, especially when you consider the amount of protection that will be received from them. Breathable gloves should be, but these can often only be bought in bulk quantities.
You should also purchase a vacuum with a HEPA filter. These vacuums collect mold spores that have settled onto the floor and have possibly worked their way into the fibers of your carpet.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Learn How To Identify What Kind Of Mold You Are Dealing With
Mold is bad for us, we all know that, but just what different kinds of mold are there? They have been around since before the time of Christ and yet some people do not think that they need to be taken seriously as a real health threat. It grows everywhere and its one purpose in the natural world is to decompose dead organic matter. It is in our homes and on our lawns, on our food and on our clothes. You cannot truly do anything to completely get rid of it, but what you can do is educate yourself about what kinds of mold there are, what they can do to you, and how you can get rid of them.
There are about three different categories that a mold is classified into: pathogenic, allergenic, and toxic. The line between pathogenic molds and toxic molds is a little difficult to discern, but the allergenic mold class is not as dangerous as the other two.
Allergenic molds can either cause allergies or make allergies that a person already has even worse. It can make such things as asthma and emphysema aggravated and more difficult to deal with. The very young and the elderly particularly have a problem with these molds, because their immune systems are not as strong as a healthy young or middle aged adult. Symptoms include typical allergy symptoms such as coughing, sneezing, itchy or watery eyes, skin rashes, and etcetera.
Toxic molds produce what are called mycotoxins and even though these kinds of molds are not as common as allergenic or even pathogenic molds, they are extremely dangerous. These molds can even cause the death of a person if the circumstances are extreme enough and while “toxic black mold” has become a common term used in the news, it is usually referring to Stachybotrys atra or some other variant of Stachybotrys. This mold is typically found on wet items, especially on wet paper or woods. This mold has also been known to cause a baby to bleed from the lungs.
Pathogenic molds are molds that tend to cause opportunistic infections in people, such as penicilliosis, which is the third most common opportunistic infection in HIV patients in southeast Asia. This is a serious problem and anyone with a weakened immune system is very much at risk for contracting this condition, even if you are simply traveling to the region for a few days.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
There are about three different categories that a mold is classified into: pathogenic, allergenic, and toxic. The line between pathogenic molds and toxic molds is a little difficult to discern, but the allergenic mold class is not as dangerous as the other two.
Allergenic molds can either cause allergies or make allergies that a person already has even worse. It can make such things as asthma and emphysema aggravated and more difficult to deal with. The very young and the elderly particularly have a problem with these molds, because their immune systems are not as strong as a healthy young or middle aged adult. Symptoms include typical allergy symptoms such as coughing, sneezing, itchy or watery eyes, skin rashes, and etcetera.
Toxic molds produce what are called mycotoxins and even though these kinds of molds are not as common as allergenic or even pathogenic molds, they are extremely dangerous. These molds can even cause the death of a person if the circumstances are extreme enough and while “toxic black mold” has become a common term used in the news, it is usually referring to Stachybotrys atra or some other variant of Stachybotrys. This mold is typically found on wet items, especially on wet paper or woods. This mold has also been known to cause a baby to bleed from the lungs.
Pathogenic molds are molds that tend to cause opportunistic infections in people, such as penicilliosis, which is the third most common opportunistic infection in HIV patients in southeast Asia. This is a serious problem and anyone with a weakened immune system is very much at risk for contracting this condition, even if you are simply traveling to the region for a few days.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
Natural Born Mold Killers Can Save You From Chemical Exposure
While there are a lot of different commercial chemicals that are used to kill mold, a lot of people do not like to use a lot of household chemicals in their homes. There is a belief that the more we use chemicals in our daily lives, the more harm they will end up doing us and since there may be some truth to this, some people have found other ways to kill mold besides the cleaners that we find in department and grocery stores.
Three natural ingredients have been found to kill mold quite effectively, but two of them are quite expensive and one is, well… kind of stinky.
The most widely available and inexpensive of the three natural ways to kill mold is vinegar. It is by far the cheapest natural method and the most simple to use. Distilled white vinegar is the best kind to use because it has no color to it and there is no risk of discoloring anything you might put it on. Vinegar will reportedly kill around 82 percent of molds in your home. While it will not kill all kinds of mold, it will kill most of the kind that you find indoors and if it does not kill it, you will most assuredly know. All you have to do is put the mold into a spray bottle, spray it on the area of mold and if you can stand the smell, let it stay on the surface without rinsing it. The smell should go away after a few hours and the mold should have died soon after.
Another way to kill mold, even if it is a bit expensive, is tea tree oil. You can find this at most health food stores and it has a little more broad of a spectrum of fungi that it will get rid of than vinegar. Combine 2 teaspoons of tea tree oil with 2 cups of water in a spray bottle. Shake it up to blend the two and spray on anything that has mold on it. Do not rinse it off. This should make about two cups and it should last indefinitely.
The last way to do this is by using grapefruit seed extract. The advantage of this is that grapefruit seed extract has no smell to it. 20 drops of the extract and two cups of water in a spray bottle should do the trick. Follow the same directions for the tea tree oil.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Three natural ingredients have been found to kill mold quite effectively, but two of them are quite expensive and one is, well… kind of stinky.
The most widely available and inexpensive of the three natural ways to kill mold is vinegar. It is by far the cheapest natural method and the most simple to use. Distilled white vinegar is the best kind to use because it has no color to it and there is no risk of discoloring anything you might put it on. Vinegar will reportedly kill around 82 percent of molds in your home. While it will not kill all kinds of mold, it will kill most of the kind that you find indoors and if it does not kill it, you will most assuredly know. All you have to do is put the mold into a spray bottle, spray it on the area of mold and if you can stand the smell, let it stay on the surface without rinsing it. The smell should go away after a few hours and the mold should have died soon after.
Another way to kill mold, even if it is a bit expensive, is tea tree oil. You can find this at most health food stores and it has a little more broad of a spectrum of fungi that it will get rid of than vinegar. Combine 2 teaspoons of tea tree oil with 2 cups of water in a spray bottle. Shake it up to blend the two and spray on anything that has mold on it. Do not rinse it off. This should make about two cups and it should last indefinitely.
The last way to do this is by using grapefruit seed extract. The advantage of this is that grapefruit seed extract has no smell to it. 20 drops of the extract and two cups of water in a spray bottle should do the trick. Follow the same directions for the tea tree oil.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Mold Remediation Cleanup Equipment
When you are talking about cleaning up mold and removing it from your home, there are a few different methods that you can use. Depending on the size and type of infection, you might want to use one technique before trying the other, however. Large scale infections can be handled by you if you know what you are doing and have the proper equipment to assist you.
Using a wet vacuum to clean up standing water in your home is a good thing to start with. This is especially important if you suspect Stachybotrys chartarum or Stachybotrys atra have made a home out of an area of your basement a home. Stachy loves standing water and cellulose-based items such as cardboard and paper, so removing standing water from any part of your home is important to keeping this kind of mold from growing. It does not always need standing water in order to grow, but it helps significantly. You should be warned, however, that if an infection already exists, you should probably call a professional to deal with this particular mold because it has been given the deadly label of “toxic”.
A vacuum cleaner equipped with a HEPA filter can assist you when you are performing any invasive procedures on your home to remove the mold infection that exists. This usually means tearing out drywall or other building materials or even just removing contaminated wallpaper. The HEPA filter removes all particles from the air that is being collected by it and releases clean air back into your home. When emptying the vacuum’s receptacle, you do not want to touch any of this material with your bare hands. When dumping it into a garbage bag, be careful to stir up the contents into the air you are breathing as little as possible.
You will also want to have a good respirator if you are planning on doing any remediation on your own. These can be anything from a simple N-95 respirator that you can find in hardware stores all the way to an electric powered air purifying respirator that requires training in order to use it effectively.
You should also wear some breathable, protective clothing made of a material such as TYVEK when doing your own remediation. Anyone that you hire should also be wearing these, as well, as it is a sign of just how professional their company may or may not be.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Using a wet vacuum to clean up standing water in your home is a good thing to start with. This is especially important if you suspect Stachybotrys chartarum or Stachybotrys atra have made a home out of an area of your basement a home. Stachy loves standing water and cellulose-based items such as cardboard and paper, so removing standing water from any part of your home is important to keeping this kind of mold from growing. It does not always need standing water in order to grow, but it helps significantly. You should be warned, however, that if an infection already exists, you should probably call a professional to deal with this particular mold because it has been given the deadly label of “toxic”.
A vacuum cleaner equipped with a HEPA filter can assist you when you are performing any invasive procedures on your home to remove the mold infection that exists. This usually means tearing out drywall or other building materials or even just removing contaminated wallpaper. The HEPA filter removes all particles from the air that is being collected by it and releases clean air back into your home. When emptying the vacuum’s receptacle, you do not want to touch any of this material with your bare hands. When dumping it into a garbage bag, be careful to stir up the contents into the air you are breathing as little as possible.
You will also want to have a good respirator if you are planning on doing any remediation on your own. These can be anything from a simple N-95 respirator that you can find in hardware stores all the way to an electric powered air purifying respirator that requires training in order to use it effectively.
You should also wear some breathable, protective clothing made of a material such as TYVEK when doing your own remediation. Anyone that you hire should also be wearing these, as well, as it is a sign of just how professional their company may or may not be.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Subscribe to:
Posts (Atom)
